Panasonic X-Plus Series SP-DRH04 - Page 25

25
control button (◀ ▲ ▶ ▼) on the remote control. Press the right
square button to change the setting value of all channels at once.
Press SEL button to change the setting value of all channels at once.
Press a right button of the mouse control just one time if you want to
select an item and please do a double-click if you want to change the
value. Once you select an item, and then press OK to set value for all
channels.
(COVERT, BRIGHTNESS,CONTRAST,HUE,SATURATION)
NAME
Set the channel name. Press the right square button and set the
channel name and select OK using the mouse or the control button (◀
▲ ▶ ▼) on the remote control. The name can be made by 10
characters at most.
COVERT
Enable/disable display of the specified video channel in live display
mode.
BRIGHTNESS
Change the brightness value of the specified channel. (0~100)
CONTRAST
Change the contrast value of the specified channel. (0~100)
HUE
Change the hue value of the specified channel. (0~100)
SATURATION
Change the saturation value of the specified channel. (0~100)
VIDEO OUTPUT
(HDMI&VGA)
Set the proper HDMI or VGA resolution among the following various
resolutions; 1024x768(4:3), 1280x720(16:9), 1280x1024(4:3),
1920x1080(16:9) The default value is 1024x768 output.
Please check your monitor resolution list and set the proper video
output resolution of DVR. It supports same resolution onto VGA and
HDMI simultaneously.
VIDEO OUTPUT
(CVBS & SPOT)
8CH & 16CH DVR have a CVBS output port and a SPOT output port
separately. But 4CH DVR has only 1 BNC output port, and it supports
the different video output function according to the main monitor
resolution. (1024x768 & 1280x102 4mode: CVBS OUTPUT ON,
1280x720 & 1920x1080 mode: SPOT OUTPUT ON)