EasyManua.ls Logo

Pando PHC-943 - 4 FUNCTION SCS (Steam Clean System by PANDO)

Pando PHC-943
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INOXPAN S.L. EN - 15
This function makes it easy to remove grease and other food debris that may have stuck to the sides
of the oven.
For easier cleaning, do not allow dirt to accumulate. Clean the oven frequently.
PROGRAMMING THE SCS FUNCTION
Always run the cycle on a cold oven. The result could be affected and the varnish damaged if it is
run when the oven is too hot.
First remove the trays and all accessories from the oven interior, including the tray supports and
telescopic guide rails.
To do this, follow the instructions in the installation and maintenance guide accompanying
the oven.
1. With the oven cold, spread a cloth out on the bottom of the oven.
2. Gently pour 200 ml of water into the bottom of the oven cavity.
4. FUNCTION SCS (Steam Clean System by PANDO)
Do not pour water into a hot oven as this can damage the enamel of the oven.
For best results, add a teaspoon of mild washing up detergent to the glass of water before pouring
onto the cloth.

Table of Contents

Related product manuals