EasyManua.ls Logo

Pando PHT-941 - Safety in Cleaning and Maintenance; Safety When Using the Pyrolytic Cleaning Cycle

Pando PHT-941
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Installation & Maintenance
English
The tray and rack have a system for easy partial removal
and handling of food. Always place these accessories inside
the oven, as indicated in the Accessories section.
The oven heats up when in use, so always use oven gloves
when performing operations inside the oven and avoid
touching the heating elements.
Only use the supplied temperature probe inside the oven (in
models that come with this feature).
Safety for cleaning and maintenance
Disconnect the appliance from the mains power supply be-
fore any operation.
Do not use steam cleaners or pressurised water to clean the
oven.
Do not use metal scouring pads, wire brushes or commer-
cially available or abrasive powder cleansers to clean the
oven door as they can scratch the surface and cause the
glass to break.
Cleaning and maintenance tasks to be carried out by the
user should not be done by children without supervision.
Before replacing a bulb, first make sure that the oven has
been disconnected from the mains to avoid the possibility of
receiving an electric shock.
Remove all accessories and dishes from the oven, including
the shelf supports and/or telescopic runners.
Clean any spillages or excess dirt, as during the pyrolytic
cleaning cycle these could ignite and become a fire hazard.
For your safety, never operate the oven without the back
panel (that protects the fan) in place.
Safety when using the pyrolytic cleaning cycle
Before starting the cleaning cycle:
CAUTION: Remove all accessories and dishes from the oven,
including the shelf supports and/or telescopic runners.

Table of Contents

Related product manuals