Pando PHT-941 - 9 Function Scs (Stem Clean System by Pando)

INOXPAN S.L. EN - 18
This feature helps to clean any grease and other deposits from the sides of the oven.
Avoid letting deposits build up to make cleaning easier. Clean the oven often.
PROGRAMING THE SCS FUNCTION
Always run the cycle when the oven is cold. Results may be affected if you do so while the oven is
too hot and in addition can damage the enamel.
First remove the trays and all accessories from inside the oven, including the tray runners and
telescopic guide rails to clean these, follow the instructions in the installation and Maintenance
booklet that comes with your oven.
To do this, follow the instructions below:
1. With the oven cold, spread a cloth on the bottom of the oven.
2. Slowly pour 200 ml of water onto the bottom of the oven.
9. FUNCTION SCS (STEM CLEAN SYSTEM BY PANDO)
Do not pour water into the hot oven as this can damage the enamel.
For best results, add a teaspoon of mild washing-
up detergent to a glass of water before pouring
it onto a cloth.