Immobilizer Antihijack 1 Antihijack 2
Sound signal:
‘Enable’
Tag is lost after
switching on
ignition: 55
seconds of frequent
‘blocking’ signals.
When door opening:
55 seconds of
frequent ‘blocking’
signals.
When the ignition is switched on again:
1. The first and second ignition switching
on: 10 seconds of frequent blocking
signals.
2. The third and following ignition
switching on: without sound signals.
Sound signal:
‘Disable’
All sound signals will be disabled when whatever blocking
algorithm is active
Status
output
‘When
blocking is
occurred’
Blocking algorithm will be duplicated (immobilizer,
Antihijack 1, Antihijack 2)
WARNING!
THESE OPERATING ALGORITHMS CAN BE ADJUSTED BY
MANUFACTURER TO IMPROVE IMMOBILIZER OPERATION.
Sound signals
‘Tag is detected’ – this signal will be sound when the ignition is switched
on and tag is in radio coverage zone.
‘Tag’s battery is discharged’ – battery of immobilizer tag is low on
power.
To Next Page
Loading...
