WARNING!
ALGORITHM 1 ‘WHEN IMMOBILIZER TAG IS DETECTED’
CANNOT BE DISABLED IN MAINTENANCE/VALET MODE. IT
WILL OPERATE ACCORDING TO SELECTED LOGIC.
Algorithms of outputs operation, sound notifications, engine blocking
Immobilizer Antihijack 1 Antihijack 2
Ignition
switching on
when tag is
not available
1. The first switching on ignition: blocking will be
performed in 15 seconds.
2. The second switching on ignition: blocking will
performed in 10 seconds.
3. The third and following switching on ignition: blocking
will performed in 2 seconds.
Tag is lost
after the
ignition is
switched on
or door is
open
Blocking
is not
performed.
Blocking is
performed in 60
seconds.
When door opening:
blocking can take
about 2 minutes.
When the ignition is switched on again:
1. The first switching on ignition: blocking
will be performed in 10 seconds.
2. The second and following switching
on ignition: blocking will performed in 2
seconds.
Sound signal:
‘Enable’
Switching on ignition without tag:
1. The first and second ignition switching on: 10 seconds of
frequent ‘blocking’ signals.
2. The third and following switching on ignition: without
sound signals.
To Next Page
Loading...
Need help?
General
