Need help?Do you have a question about the PanoSpace I and is the answer not in the manual?
Key preliminary information and warnings before operating the printer.
Essential safety guidelines for user protection and proper printer use.
Identification of external components and design of the 3D printer.
List and visual representation of all items provided with the printer.
Detailed technical data for printing, software, and mechanical aspects.
Step-by-step guide for setting up and powering on the 3D printer.
Instructions for the correct procedure of inserting filament into the printer.
Guide to selecting and initiating a print job from the device interface.
Procedures for removing finished prints and cleaning the build platform.
How to manage print head temperature via the touch screen interface.
Step-by-step process for removing filament using the touch screen controls.
Guide for manually calibrating the print bed for optimal adhesion.
Procedure for setting the correct gap between the nozzle and print bed.
Configuration options for temperature, sleep timer, and language display.
Instructions for acquiring and setting up the PanoBuilder software.
Steps to establish communication between the printer and the software.
How to import 3D models (3MF, STL, PLY) into the PanoBuilder application.
Workflow for preparing and sending models to the printer from the software.
Tools and techniques for modifying 3D models within the PanoBuilder interface.
Manual control of printer axes and movements via the software.
Method for printing models stored on a micro SD card.
Process for calibrating the printer for improved print accuracy.
Software configuration options for units, connection, and language.
Guide for updating the PanoBuilder application and printer firmware.
Routine cleaning steps for maintaining optimal printer performance.
Solutions for frequently encountered problems with the 3D printer.
General| Connectivity | USB |
|---|---|
| Z Resolution | 25 - 100 microns |
| Light Source | 405nm LED |
| Layer Resolution | 25 - 100 microns |
| Supported Materials | Photopolymer Resins |
| Display | Touch Screen |
To Next Page