PanoSpace I - First Use Guide; Initial Notes; Safety Precautions

5
I. First use
1.1 Note
■
Please read this chapter carefully before rst use.
■
Please follow all the safety rules in this manual.
■
Do not repair or modify PanoSpace I 3D Printer, doing so will void the warranty.
■
Use of lament and / or components produced by other companies may void
the warranty.
1.2 Safety
■
Use the printer in a well ventilated place.
■
Do NOT use or store the printer under moist conditions.
■
Use the power adaptor supplied by PanoSpace. Power adaptors from other
manufacturers might damage the printer or cause a re.
■
Children under 12 using this product should be supervised by a responsible
adult. Printed objects or small parts may present a choking hazard and
should be kept away from young children.
■
Do NOT touch the extruder, print bed and all other moving parts while heating or
printing.
■
Do NOT use the printer for a long period of time when not present.
■
Do NOT cleanup or move the printer when power is on.
■
Do NOT use cleaning solvents or solutions to clean the printer. To clean the
printer, use a clean, slightly damp cloth.
■
When removing excess lament, wearing gloves and goggles is suggested.