8
Electronics
Screen: 3.2 inch resistor touch screen
Input: AC 100 - 240 V, 2 A, 50 / 60 Hz
Output: DC 24 V, 5 A
Operation and Storage Requirement
Printer: 15 - 26 °C (59 - 79 °F), < 70% RH (relative humidity)
Filament: 15 - 26 °C (59 - 79 °F), 25% - 45% RH (relative humidity)
Note: Keep filament away from moist conditions. PLA absorbs water in the air. It might affect print quality. Once
the filament package is opened, it must be used within a reasonable time.
Dimensions and Weight
Dimensions: 407 mm x 288 mm x 333 mm
(16 inch x 11.3 inch x 13.1 inch)
Net Weight: 8.4 kg (18.5 lb)
To Next Page
Loading...