Pantum BM5100ADW Series - Language Setting; Restore Factory Settings

125
11.1.2. Language Setting
"Language Setting" is used to select the language to be displayed on the control panel.
1. Press "Menu" to enter the menu setting interface.
2. Press "▲" or "▼" to select “System set” and then press "OK".
3. Press "▲" or "▼" to select "Language set" and then press "OK" to do language setting.
11.1.3. Restore Factory Settings
“Restore factory settings” is used to recover the default settings of printer. The printer will
restart itself automatically after recovering factory settings.
1. Press "Menu" to enter the menu setting interface.
2. Press "▲" or "▼" to select “System set” and then press "OK".
3. Press direction key "▲" or "▼" to select the "Restore set" option and press "OK".
Note:
• Factory settings of network printer can be recovered via embedded Web server (please
refer to Chapter 6.2.4) .