Pantum BM5100ADW Series User Manual

9
11
OK
Confirm the selection on screen.
12
UP
Scroll through the menus and options .
Increase 1 copy on the ready interface of Copy mode.
13
Down
Scroll through the menus and options .
Decrease 1 copy on the ready interface of Copy mode.
14
Status Light
Indicate the status of printer. (Please see Chapter 1.6).
1.6. Function of status indicator
The meanings of status displayed by the status indicator are as below:
No.
Status displayed
by the status
indicator
Status
Status Description
1
Die out
Shutdown or sleep state
2
Green indicator
normally on
Printer is ready
3
Green indicator
blinks
Printing, copying, scanning and other working
status
4
Orange indicator
blinks
Low toner warning
5
Red indicator
normally on
• Toner cartridge error (uninstalled ink cartridge,
unmatching ink cartridge, invalid toner cartridge)
• Drum unit error (the drum units are not installed,
not compatible or come to the end of their service
lives.)
• Paper error (a paper out, paper jam or feed failure
occurs)
• Scan error (a scanning failure occurs, and the ADF
has an open cover or a paper jam.)
• Printer errors such as opened front cover

Pantum BM5100ADW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Automatic
Connectivity	USB, Ethernet, Wi-Fi
Monthly Duty Cycle	100, 000 pages
Processor	1.2 GHz
Memory	512 MB
ADF Capacity	50 sheets
Scan Type	Flatbed, ADF
Fax Function	Yes
Input Capacity	250 sheets
Output Capacity	150 sheets
Printer Languages	PCL6, PostScript 3
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
First Print Out Time	6.9 seconds
Toner Yield	3, 000 pages
Mobile Printing	AirPrint, Mopria
Print Speed	40 ppm (A4) / 42 ppm (Letter)
Copy Speed	40 cpm (A4) / 42 cpm (Letter)