Name: Pantum BM5100ADW Series
Brand: Pantum
Rating: 4 (1 reviews)

To Next Page

To Previous Page

3. Click "Create" to pop out a window as below and set relevant parameters; after settings

completed, and then click "Apply".

6.2.3.5. Sleep time setup

If you want to change the sleep time of the printer, you can set it via the embedded Web server

(the printer installed via network connection).

1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).

2. Click “Settings” – “Machine settings” – “System”.

3. Select sleep time according to you need and then click “Apply”.

6.2.4. Recover factory settings via Web server

1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).

2. Click "User Management" and input the correct “User name” and “Password”; then, click

“Restore to Factory Settings”. After completion, the printer will reboot automatically.

Note：

• After factory settings of printer are recovered, user name of the administrator will be

recovered to admin and the login password will be recovered to 000000.

• You can also recover factory settings via keys on the control panel of printer, please

refer to Chapter 11.1.3 .

Questions and Answers:

Need help?

Do you have a question about the Pantum BM5100ADW Series and is the answer not in the manual?

Pantum BM5100ADW Series Specifications

General