Pantum BM5100ADW Series User Manual

128
11.1.7. Auto shut-off setting
“Auto shut-off setting” to set off condition and off delay of printer.
1. Press "Menu" to enter the Menu Settings interface.
2. Press "OK" to select the "System set" option.
3. Press direction key “▲” or “▼” to select options of “Auto off set”, press “OK” to set off
condition and off delay.
Note:
Set auto off condition:
• Shutdown under no-port state (default configuration. : no port is connected, Wi-Fi function
deactivated, printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.

Pantum BM5100ADW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Automatic
Connectivity	USB, Ethernet, Wi-Fi
Monthly Duty Cycle	100, 000 pages
Processor	1.2 GHz
Memory	512 MB
ADF Capacity	50 sheets
Scan Type	Flatbed, ADF
Fax Function	Yes
Input Capacity	250 sheets
Output Capacity	150 sheets
Printer Languages	PCL6, PostScript 3
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
First Print Out Time	6.9 seconds
Toner Yield	3, 000 pages
Mobile Printing	AirPrint, Mopria
Print Speed	40 ppm (A4) / 42 ppm (Letter)
Copy Speed	40 cpm (A4) / 42 cpm (Letter)