Pantum BM5100ADW Series User Manual

58
5. Wireless network setup (applicable to Wi-Fi
models)
Wireless network connection type is divided into basic structure mode and Wi-Fi Direct mode. If
you have problems with wireless network setup, please refer to Chapter 5.4 Wireless Network
Setup FAQs.
Basic structure mode: connecting to a wireless device via router
1. Access point (wireless router)
2. Wireless network printer
3. Computer connecting to access point via wireless network
4. Computer connecting to access point via network cable
Wi-Fi Direct mode: wireless client is connecting to a printer with
Wi-Fi function
1. Wireless network printer
2. Wireless client is directly connecting to a wireless network
printer
5.1. Basic structure mode
You can connect a computer to your printer via access point (wireless router) as the medium.
Access point (wireless router) connection is divided into wireless network setup and Wi-Fi
Protected Setup (WPS).
Important: Before wireless network installation, you must learn about the service set identifier
(SSID) and password of your access point in order to use them during wireless network setup.
If they cannot be determined, please consult your network administrator or access point
(wireless router) manufacturer. If they cannot be determined, please consult your network
administrator or access point (wireless router) manufacturer.

Pantum BM5100ADW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Automatic
Connectivity	USB, Ethernet, Wi-Fi
Monthly Duty Cycle	100, 000 pages
Processor	1.2 GHz
Memory	512 MB
ADF Capacity	50 sheets
Scan Type	Flatbed, ADF
Fax Function	Yes
Input Capacity	250 sheets
Output Capacity	150 sheets
Printer Languages	PCL6, PostScript 3
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
First Print Out Time	6.9 seconds
Toner Yield	3, 000 pages
Mobile Printing	AirPrint, Mopria
Print Speed	40 ppm (A4) / 42 ppm (Letter)
Copy Speed	40 cpm (A4) / 42 cpm (Letter)