Pantum BM5100ADW Series User Manual

74
6.2.3.3. Configure the FTP address book
If you want to scan a file to the FTP server, you need to configure the FTP address book
first.When scanning, you may send the image scanned to the FTP server.Before configuring
the FTP address book, you may need to ask your network administrator for the server IP
address, port number, login name, password and server name.
1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).
2. Click "Settings", "Machine Settings" and then "FTP Address Book" to enter the setting
interface of FTP address book.
3. Click "Create" to pop out a window as below and set relevant parameters; after settings
completed, and then click "Apply".
6.2.3.4. Configure SMB Address Book
To scan documents to SMB server, you need to configure the SMB address book first. You can
send the scanned images to SMB server while scanning.
1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).
2. Click "Settings", "Machine Settings" and then "SMB Address Book" to enter the setting
interface of SMB address book.

Pantum BM5100ADW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Automatic
Connectivity	USB, Ethernet, Wi-Fi
Monthly Duty Cycle	100, 000 pages
Processor	1.2 GHz
Memory	512 MB
ADF Capacity	50 sheets
Scan Type	Flatbed, ADF
Fax Function	Yes
Input Capacity	250 sheets
Output Capacity	150 sheets
Printer Languages	PCL6, PostScript 3
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
First Print Out Time	6.9 seconds
Toner Yield	3, 000 pages
Mobile Printing	AirPrint, Mopria
Print Speed	40 ppm (A4) / 42 ppm (Letter)
Copy Speed	40 cpm (A4) / 42 cpm (Letter)