Name: Pantum BM5100ADW Series
Brand: Pantum
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6.2.3.2. Configure the E-mail address book

If you want to scan a file to an e-mail address, you need to configure the e-mail address book

first and then scan the file to the assigned e-mail address.The e-mail will not be received before

proper setting on the e-mail box; for specific setting steps, please consult your network

administrator.

I. Set the E-mail address book

1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).

2. Click "Settings", "Machine Settings" and then "E-mail Address Book" to enter the setting

interface of e-mail address book.

3. Click "Create" to pop out a window as below and edit the contact name and input the e-mail

address, and then click "Apply".

Note:

• If some groups have been created, you may click to check a corresponding group to

add the newly created e-mail address into it.

II. Set the e-mail group

1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).

2. Click “Settings”, “Machine Settings” and then “E-mail Group” to enter the setting interface of

e-mail group.

3. Click “Create” to pop out a window as below and edit the group name and check the e-mail

address to be added in the contact name (e-mail address) listbox, and then click "Apply".

Questions and Answers:

Need help?

Do you have a question about the Pantum BM5100ADW Series and is the answer not in the manual?

Pantum BM5100ADW Series Specifications

General