EasyManuals Logo

Pantum BM5100ADW Series User Manual

Pantum BM5100ADW Series
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
16
3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed error,
and then load the paper into the tray print-side down.The automatic feeder tray can be loaded
up to 250 pages, 80g/m² paper.
4. Raise the output tray to avoid the printed paper from slipping and falling, or immediately
remove the printed document after the printing is complete.
Note:
• It is recommended that you raise the output tray to prevent the paper from slipping
and falling after printing. If you choose not to raise the output tray, we recommend that
you immediately remove the printed paper from the printer.
• If more than 250 pages (80 g/m²) are put inside the auto feed tray at one time, paper
jam or paper feed failure will be led to.
• If carrying out single-sided printing, please make sure that the side to be printed (the
blank side) is face down.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum BM5100ADW Series and is the answer not in the manual?

Pantum BM5100ADW Series Specifications

General IconGeneral
Print TechnologyMonochrome Laser
Print Resolution1200 x 1200 dpi
Duplex PrintingAutomatic
ConnectivityUSB, Ethernet, Wi-Fi
Monthly Duty Cycle100, 000 pages
Processor1.2 GHz
Memory512 MB
ADF Capacity50 sheets
Scan TypeFlatbed, ADF
Fax FunctionYes
Input Capacity250 sheets
Output Capacity150 sheets
Printer LanguagesPCL6, PostScript 3
Copy Resolution600 x 600 dpi
Scan Resolution1200 x 1200 dpi
First Print Out Time6.9 seconds
Toner Yield3, 000 pages
Mobile PrintingAirPrint, Mopria
Print Speed40 ppm (A4) / 42 ppm (Letter)
Copy Speed40 cpm (A4) / 42 cpm (Letter)

Related product manuals