2
Product View
Please leave enough room to open the paper tray, cover plate and door, and install the hardware
options, when selecting a location for the printer.
• Set up the printer near the power outlet.
CAUTION - POTENTIAL INJURY: To avoid the danger of fire or electric shock, please connect the
power cord to a properly grounded power supply with proper rated voltage
The socket should be close to the product and easy to use.
CAUTION - SHOCK HAZARD:To avoid the danger of electric shock, please do not place or use this
product near water or wet places.
• Place it on a flat, firm and stable surface.
• Keep the printer:
– clean, dry and dust-free.
– Stay away from scattered staples and paper clips.
– Keep away from direct airflow from air conditioners, heaters or ventilation equipment.
– Keep away from direct sunlight and humidity limits.
• Leave the following recommended spaces around the printer to ensure good ventilation:
To Next Page
Loading...
