Pantum M9106 Series - 06 Print; Start the Printer; Print Settings; Print the Documents

32
06 Print
Before using the printer to print documents, please read Chapter 3 and install the printer driver.
Start the printer
1. Make sure that the power cord and USB/network cable are properly connected.
2. Start the computer. Refer to Chapter 3 if you need to install the printer driver.
3. Power on the printer and wait for the printer to enter standby mode.
Note:
• If the computer fails to recognize the printer, restart the printer or reconnect the USB/network
cable. If the problem persists, please contact the customer service center.
Print Settings
Print the documents
1. Select Print from the File menu.