Pantum P2500 Series Maintenance Manual

1–6
1.1.3.2 Cancel/Continue Button Functions
Printer status
Operation
Printer action
Sleep Mode
Short press or
long press
button 2
Wake up from the sleep mode
Error
The printer is out of
paper or a feed jam
occurred
Short press
button 2
Continue printing
A print job exists
Long press
button 2
Cancel the current print job
Ready
Long press
button 2
Print the test page (Not for printers
without WIFI)
Printing
Long press
button 2
Cancel the current print job (The job
pages of which the numbers have
been received by the printer will still
be printed out while those waiting
to be received will be canceled from
printing.
Shutdown State
Press button 2
Only for printers with WIFI, you can
turn on the printer, then press and
hold button 2 for at least 5 seconds
to restore the printer's factory
defaults (resetting the IP address,
admin password, etc.).
Printers without WIFI do not
respond to this action.

Pantum P2500 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	15, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Connectivity	USB 2.0
Dimensions	337 x 220 x 178 mm
Processor Speed	600 MHz
Memory	128 MB
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8s
Operating System Support	Windows, Mac, Linux
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Thick, Cardstock, Label, Envelope, Thin
Media Weight	60 - 163 g/m²