Pantum P2500 Series Maintenance Manual

3–7
3.4.5 Fusing
When the paper moves onto the heating roller, the toner is melted at a specific
temperature. The pressure poller (PR) then presses the toner into the paper
fibers, curing it to the paper.
Note: If the fusing temperature is too high or too low, toner fusing results will be
affected.
3.4.6 Cleaning
As the toner on the surface of the OPC is not completely transferred to the paper, it
must then be cleaned by a blade before the next round of the imaging process.

Pantum P2500 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	15, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Connectivity	USB 2.0
Dimensions	337 x 220 x 178 mm
Processor Speed	600 MHz
Memory	128 MB
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8s
Operating System Support	Windows, Mac, Linux
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Thick, Cardstock, Label, Envelope, Thin
Media Weight	60 - 163 g/m²