Pantum P2500 Series Maintenance Manual

2–20
2.4 Test Print
2.4.1 Offline Self-test Page Print
The offline configuration page can be set from the operation panel using the
following steps:
1. Power on, making sure the indicator display status reads as Ready.
2. To print the test page on a printer with WIFI, press down the Control Panel
(Cancel/Continue) for three seconds. To do that on a printer without WIFI, press
down the Information Page button for three seconds.
Note:
1. Configuration pages differ on different models, for example, there is the
network configuration information page for models with network whereas
there is the WIFI configuration information page for models with WIFI.
2. The model appears on the demo page and the configuration page differs
depending on the model.

Pantum P2500 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	15, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Connectivity	USB 2.0
Dimensions	337 x 220 x 178 mm
Processor Speed	600 MHz
Memory	128 MB
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8s
Operating System Support	Windows, Mac, Linux
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Thick, Cardstock, Label, Envelope, Thin
Media Weight	60 - 163 g/m²