III
Installation
The printer should be placed on a flat and stable surface, such as a desktop, away from people
and from sources of vibration, and close to a regular, grounded power supply outlet. The ambient
temperature of the installation site should be between 10°C and 32.5°C, with humidity between
20% and 80%.
Note:
Do not install the printer in crowded areas.
Do not place the printer near heaters, refrigerators, air conditioners, or fluid and chemical
products.
The printer must not be exposed to direct sunlight or installed in overheated, damp, and
dusty areas.
Do not connect the printer to a wall socket or power supply outlet controlled by an
autotimer.
A power failure will cause loss of the device’s memory.
Do not connect the printer to a power supply outlet that shares the same circuit as
high-power appliances or other devices which could cause an overload.
Avoid placing the printer near speakers or cordless telephone docks.
Ensure the printer area is ventilated when using the printer for long periods or when
printing in bulk in a poorly ventilated room.
To Next Page
Loading...
Need help?
General