10 Installer’s Manual
Step 4: Enter the [SERIAL #] of the source keypad.
The source is the programmed keypad whose data you want to
copy to other keypads.
Step 5: Enter the [SERIAL #] of the destination keypads.
The destination is the keypad(s) you want to program with the
source’s data. If you want to program more than one keypad with
the source’s data, enter the serial numbers of the keypads one at
a time.
Step 6: Once you have entered the serial numbers of the
keypads you want to program, press the [ACC] button.
To Next Page
Loading...
Need help?
General
