Digiplex LED Keypads 19
normal state (deactivate) when the event programmed in section
[008] occurs unless the keypad is in PGM Timed Mode (see
section 5.4 of this manual). The PGM Deactivation Event is
programmed in the same manner as the PGM Activation Event.
5.4 PGM TIMED MODE
Section 005: Option [2]
If the keypad is in PGM Timed Mode, the keypad's on-board
PGM will be deactivated according to the PGM Timer (see
section 5.5 of this manual) instead of the PGM Deactivation
Event.
Option [2] OFF
= Deactivation as per PGM Deactivation Event (default)
Option [2] ON = PGM will deactivate according to the PGM Timer
5.5 PGM TIMER
Section 006
If the keypad's on-board PGM is in PGM Timed Mode, the value
programmed in section [006] represents how long the PGM will
remain in its opposite state (see section 5.1 of this manual) after
being activated. To program the timer, enter a 3-digit decimal
value (000 to 255) in section [006]. The 3-digit value will be
multiplied by the PGM Base Time of 1 second or 1 minute (see
section 5.6 of this manual).
To Next Page
Loading...
Need help?
General
