20 Installer’s Manual
5.6 PGM BASE TIME
Section 005: Option [3]
If the keypad's on-board PGM is set in PGM Timed Mode (see
section 5.4 of this manual) you must define whether the value
programmed in section [006] is in minutes or seconds.
Option [3] OFF= PGM Base Time is 1 second (default)
Option [3] ON = PGM Base Time is 1 minute
5.7 PGM OVERRIDE
Section 005: Option [4]
When PGM Override is enabled, the keypad's on-board PGM will
ignore PGM Activation Events, PGM Deactivation Events, and
PGM Timers. It will remain in its normal state (see section 5.1 of
this manual) until the PGM Override is disabled. This option may
be used to test the PGM connections.
Option [4] OFF= PGM Override disabled (default)
Option [4] ON = PGM Override enabled