DIGIPLEX SERIES
[246] ___/___/___ recycle(s) # OF RECYCLES IN PARTITION 1 Unlimited
[247] ___/___/___ recycle(s) # OF RECYCLES IN PARTITION 2 Unlimited
[248] ___/___/___ recycle(s) # OF RECYCLES IN PARTITION 3 Unlimited
[249] ___/___/___ recycle(s) # OF RECYCLES IN PARTITION 4 Unlimited
[250] ___/___/___ see section [503] PGM1 DELAY 5 sec.
[251] ___/___/___ see section [503] PGM2 DELAY 5 sec.
[252] ___/___/___ see section [503] PGM3 DELAY 5 sec.
[253] ___/___/___ see section [503] PGM4 DELAY 5 sec.
[254] ___/___/___ see section [503] PGM5 DELAY 5 sec.
[255] ___/___/___ x2 sec.(min. = 32 sec.) TLM FAIL TIMER 32 sec.
[256] ___/___/___ seconds DELAY ALARM TRANSMISSION TIMER Instant
[257] ___/___/___ attempts MAXIMUM DIALING ATTEMPTS 8 attempts
[258] ___/___/___ seconds DELAY BETWEEN DIALING ATTEMPTS 20 sec.
[259] ___/___/___ seconds (max. = 60 sec.) PAGER DELAY BEFORE DATA TRANS. Disabled
[260] ___/___/___ minutes DELAY POWER FAILURE REPORT 30 min.
[261] ___/___/___ days AUTO TEST REPORT Disabled
Section # Hours (00-23) & Minutes (00-59) Description
[270] ___/___:___/___ AUTO TEST REPORT TIME OF DAY
[271] ___/___:___/___ AUTO ARM TIME PARTITION 1
[272] ___/___:___/___ AUTO ARM TIME PARTITION 2
[273] ___/___:___/___ AUTO ARM TIME PARTITION 3
[274] ___/___:___/___ AUTO ARM TIME PARTITION 4
Access Control
Sections [301] to [392] and section [537] are reserved for control panels with the Access Control version (version 2.20ACC).
If you have a control panel with the Access Control version, refer to the DGP-48 Control Panel: Access Control Features
Programming Guide and the Digiplex Access Control for Control Panel DGP-48 and LCD Keypad DGP-641ACC Reference
and Installation Manual.