DIGIPLEX SERIES
Dialer Options
Bold = Default setting
SECTION [521]: Dialer Options
Option OFF ON
[1]&[2]
l see table
l see table
l see table
l see table
[3] Dialer Enabled/Disabled l Disabled l Enabled
[4] Dialing Method l Pulse l Tone (DTMF)
[5] Pulse Ratio l 1:2 (Europe) l 1:1.5 (North America)
[6] Busy Tone Detection l Disabled l Enabled
[7] Switch to pulse dialing on 5th attempt l Disabled l Enabled
[8] Bell/Siren upon Communication Failure if
system is armed
l Disabled l Enabled
SECTION [522]: Dialer Options
Option OFF ON
[1] Call Back l Disabled l Enabled
[2] Automatic Event Buffer Transmission l Disabled l Enabled
[3] Hourly Test Transmission l Disabled l Enabled
[4] Shabbath Feature l Disabled l Enabled
[5] Future Use l Disabled l Enabled
[6] Alternate Dial l Disabled l Enabled
[7] Dial Tone Delay l Force dial if no dial tone l Hang-up if no dial tone
[8] Report zone restore options l On bell cut-off l On zone closure
To Next Page
Loading...
Need help?
General
