8 User’s Manual
3.8 Manual Bypass Arming
This feature arms the system while bypassing zones
you wish to leave unarmed.
By using the Bypass Recall feature, you can reinstate
the latest zone bypass instructions saved in memory.
Press [
BYP] in Step 2 (see above) and the previous
bypass status will be re-established.
3.9 Force/Away Arming
To arm the system rapidly without waiting for the
READY light (for all zones to close), use Force/Away
arming. Open zones will not be protected, but will be
armed as soon as they are closed.
3.10 Arming Both Systems Simultaneously
If your code has access to both systems:
How do I Manually Bypass Arm the system?
1. Press the [
BYP] key and then enter your User Code.
The [
BYP] key will illuminate as well as any zones that
have already been bypassed.
2. Enter the number of the zone(s) you wish to bypass.
To unbypass a bypassed zone, enter the zone number
of the bypassed zone.
3. Press [
ENTER]. Arm the system using desired method.
The [
BYP] key will remain illuminated to indicate that
there are bypassed zones.
How do I Force arm the system?
1. Press the [
AWAY] key and then enter your user code.
The [
AWAY] key will flash.
K6X6-EU12.fm Page 8 Tuesday, June 27, 2006 11:05 AM
To Next Page
Loading...
Need help?
General
