12 User’s Manual
4.2 Panic 2 - Auxiliary Alarm
Pressing keys [4] and [6] simultaneously for 2 sec.
will generate a “panic 2” or an “auxiliary alarm”.
4.3 Panic 3 - Fire Alarm
Pressing keys [7] and [9] simultaneously for 2 sec.
will generate a “panic 3" or a “fire alarm”.
5.0 Key Access Programming
Several control panel features can be programmed
quickly on the keypad. The monitoring station or installer
may ask you to perform some of these functions. To
enter the One-key Access programming mode:
How do I enter One-key Access programming mode?
1. Press the [
ENTER] key.
2. Enter the [
MASTER CODE] or [USER CODE 1].
3. Then press the key that corresponds to the feature you
wish to activate (see below).
4. Press [
ENTER] or [CLEAR] to exit.
Key Feature Description
[9] Auto-arming Time Programming:
When the [9] key flashes, enter the time
using the 24-hour clock (ex: 6 p.m. would
be entered as 18:00).
K6X6-EU12.fm Page 12 Tuesday, June 27, 2006 11:05 AM
To Next Page
Loading...
Need help?
General
