6 User’s Manual
3.2 Regular system arming
3.3 Stay Arming
Stay arming allows you to remain in the protected
area while partially arming the system (perimeter
zones only, such as doors and windows).
3.4 One Touch Arming
One touch system arming - no code required. Check
with your installer if these features are enabled.
3.4.1 Key [10] - Regular Arming:
When the READY light is on, pressing key [10] steadily
for 2 seconds automatically arms the system.
3.4.2 Key [STAY/11] - Stay arming:
Please refer to section 3.3 on page 6 for an explanation
of stay arming. Press the [
STAY/11] key steadily for 2
How do I Regular arm the system?
1. The green
READY light must be ON in order to arm the
system.
2. Enter your user code.
After the Confirmation beep, the
READY light and the
[
STAY] and [AWAY] keys will begin to flash. The exit
delay timer will begin the countdown to arming.
How do I Stay arm the system?
1. Press the [
STAY] key.
2. Enter your User Code.
After the Confirmation beep, the
READY light and the
[
STAY] and [AWAY] keys will begin to flash. The exit
delay timer will begin the countdown to arming.
K6X6-EU12.fm Page 6 Tuesday, June 27, 2006 11:05 AM
To Next Page
Loading...
Need help?
General
