14 Reference & Installation Manual
via the communication bus.
Option [8] OFF = Grafica’s anti-tamper switch is disabled. (Default)
Option [8] ON =Grafica’s tamper is enabled.
4.8 BEEP ON TROUBLE
SECTION [003]: OPTIONS [1] TO [4]
Potential troubles have been sorted into groups. With these options
enabled, the keypad will emit an intermittent beep tone whenever a
trouble condition occurs from one of the Trouble Groups. The
intermittent beep will remain activated until the user enters the
Trouble Display or if the trouble is resolved. For a list of troubles, see
the DigiplexNE Reference and Installation Manual. The intermittent
beep will be re-initialized whenever the trouble condition reoccurs. By
default, options [1] to [4] are OFF.
4.8.1 SYSTEM AND CLOCK TROUBLE BEEP
SECTION [003]: OPTION [1]
O
ption [1] OFF = Beep disabled (Default).
Option [1] ON = Beep on: System Troubles and Clock Loss.
4.8.2 COMMUNICATOR TROUBLE BEEP
SECTION [003]: OPTION [2]
Option [2] OFF = Beep disabled (Default).
Option [2] ON = Beep on: Communicator Troubles.
To Next Page
Loading...
