18 Reference & Installation Manual
5.0 PROGRAMMING SECTIONS
U= Default Setting
U= Default Setting
* Must be enabled through Option [4] in section [002] first.
Section [001]: Keypad Partition Assignment
Option OFF ON
[1] P
ARTITION 1 .DISABLED UENABLED
[2] PARTITION 2 .DISABLED UENABLED
[3] PARTITION 3 .DISABLED UENABLED
[4] PARTITION 4 .DISABLED UENABLED
[5] PARTITION 5 .DISABLED UENABLED
[6] PARTITION 6 .DISABLED UENABLED
[7] PARTITION 7 .DISABLED UENABLED
[8] PARTITION 8 .DISABLED UENABLED
Section [002]: General Options 1
Option OFF ON
[1] D
ISPLAY CODE ENTRY UDISABLED .ENABLED
[2] DISPLAY EXIT DELAY .DISABLED UENABLED
[3] DISPLAY ENTRY DELAY .DISABLED UENABLED
[4] CONFIDENTIAL MODE UDISABLED .ENABLED
[5]
T
O EXIT CONFIDENTIAL MODE *
UENTER CODE .PRESS KEY
[6] EXIT DELAY BEEP .DISABLED UENABLED
[7] FUTURE USE .N/A .N/A
[8] K
EYPAD TAMPER UDISABLED .ENABLED
To Next Page
Loading...
