DigiplexNE Grafica Keypad Module 15n
4.8.3 MODULE AND BUS TROUBLE BEEP
SECTION [003]: OPTION [3]
Option [3] OFF = Beep disabled (Default).
Option [3] ON = Beep on: Module and Bus Troubles.
4.8.4 ALL ZONE TROUBLE BEEP
SECTION [003]: OPTION [4]
Option [4] OFF = Beep disabled (Default).
Option [4] ON = Beep on: all Zone Troubles.
4.9 CONFIDENTIAL MODE TIMER
SECTION [004]
Section [004] determines the amount of time without action before
the keypad enters Confidential Mode, (see page 12). The
Confidential Mode Timer can be set from 005 seconds to 255
seconds. Default: 120 seconds.
4.10 DOWNLOAD FROM THE MEMORY KEY
SECTION [100]
Use this section to download Grafica’s section [001] to [004], all
zone labels, area labels, and user labels from the Memory Key. To
download the contents:
1) Insert the Memory Key onto the keypad’s connector (see Figure
8 on page 16).
2) To download the contents of the Memory Key, enter the keypad’s
programming mode and enter section [100].
3) When the keypad emits a confirmation beep, wait five seconds
and remove the Memory Key after the second confirmation beep.
To Next Page
Loading...
