Paradox SPECTRA SP5500 User Manual

4 Programming Guide
Walk Test Mode
Installer and Maintenance Codes
WinLoad
Monitoring Phone #
Step Action Details
1
+ [
INSTALLER CODE] = flash. [MAINTENANCE CODE] may also be used.
2
3 [6] Activates or deactivates Walk Test Mode.
Step Action Details
1
+ [
INSTALLER CODE] = flash. [MAINTENANCE CODE] may also be used.
2
3 [7] = Installer Code
[8] = Maintenance Code
4 [CODE]* Enter 4- or 6-digit code.* To erase a code, press the [SLEEP] key for 3 seconds.
5 [CONFIRM CODE] Re-enter 4- or 6-digit code.
Step Action Details
1
+ [
INSTALLER CODE] = flash. [MAINTENANCE CODE] may also be used.
2
3 [9]
4 [PHONE #] + [ENTER]* Enter PC phone # (up to 32 digits) and press [ENTER].* To erase WinLoad phone #, panel
ID, and PC password, press the [SLEEP] key for 3 seconds.
5 [PANEL ID] Enter 4-digit Panel ID
6 [PC PASSWORD] Enter 4-digit PC Password
Step Action Details
1
+ [
INSTALLER CODE] = flash. [MAINTENANCE CODE] may also be used.
2
3 [1]
4 [PHONE #] + [ENTER]* Enter monitoring station phone # (up to 32 digits) and press [ENTER].* To erase monitoring
phone #, reporting format, and account #s, press the [SLEEP] key for 3 seconds.
5 [PARTITION 1 ACCOUNT #]
6 [1] = CID
[2] = SIA
7 [PARTITION 2 ACCOUNT #]

Paradox SPECTRA SP5500 Specifications

General

Partitions	2
User Codes	32
Event Buffer	256 events
StayD Mode	Yes
Communication	GSM (optional)
Remote Control	Yes
System Type	Hybrid
Wireless Zones	32
Battery Backup	12V 7Ah
Operating Temperature	0°C to 50°C (32°F to 122°F)
Humidity	5% to 90% non-condensing