DEVICE MAINTENANCE AND CLEANING
TRAINING
©Parata
How to Clean the ATP Device Main Hopper
4. Pull out the main hopper and clean the main hopper by wiping with a soft, lint free
cloth.
5. Replace the main hopper along the guide.
6. Slide the main hopper all the way in until it stops.
NOTE: In an extreme case, where shutters are very dirty, you may wipe with a soft cloth,
moistened slightly with alcohol, and then wipe off immediately to prevent streaking of pill
dust residue.
NOTE: Parata recommends daily cleaning of the ATP Device main hopper.
To Next Page
Loading...
