Parata ATP - How to Adjust or Replace the Perforation Blade (Admin)[Online Video]

DEVICE MAINTENANCE AND CLEANING
TRAINING
51
©Parata
2014
How to adjust or replace the Perforation Blade
(ADMIN)[online video]
The perforation blade makes a dotted cut to divide the bags between the seals on the top and
the bottom of each bag. The blade also makes a small “pre-cut” or “notch” to assist the end
user with tearing the bags into single packets or strips of packets. This procedure describes
how to replace the old perforation blade and heater rubber and install a new blade and heater
rubber. This document also includes inspection and adjustment procedures for the anvil
assembly .
Required Materials
3 mm Allen Wrench
1.5 mm Allen Key
Anvil Assembly