DEVICE MAINTENANCE AND CLEANING
TRAINING
©Parata
How to Clean the ATP Lower Packaging Unit (LPU)
1. Turn off the power switch and check that the heater is cool before cleaning.
2. Open the front door and slide the Lower Packaging Unit out.
3. Move the 2
nd
Shutter to it’s upward position and clean the shutter by wiping with a
soft, lint free cloth. Then, pass the cloth through the shutter to clean.
2. Remove the heater holder if the heater or the heater holder rubber is caked with
medication powder. To remove the heater holder, move it back an forth, while
simultaneously pushing upwards.
To Next Page
Loading...