Parata ATP - ATP Cleaning and Maintenance Checklist

DEVICE MAINTENANCE AND CLEANING
TRAINING
9
©Parata
2014
ATP Cleaning and Maintenance Checklist
Clean Daily (or Every Eight Hours of Use) in this Order
 Step One: Med Drawers
 Step Two: Sub Hoppers
 Step Three: 1
st
Shutter
 Step Four: UTC Tray
 Step Five: Main Hopper
 Step Six: LPU: 2
nd
Shutter, Heat Anvil, Heat Anvil Pad, LPU Floor
Clean Quarterly
 UTC Conveyor Assembly
Clean with Each Canister Refill
 Canister and Motor Base
Clean with Each Ribbon Change
 Print Head
Replace as Needed
Ribbon
Paper
Cutter Blade
Perforation Blade
Motor Assembly
Printer Head