Parker Aries AR-08AE - Compatible Parker Products

Chapter 1 Introduction - 3 -
Output Power Level
Servo Motor Drives
In Table 1, the maximum current is given at 120/240 VAC input, which
equates to a motor bus voltage of 170/340 VDC.
Drive Continuous
Current (RMS)
Peak
Current
(RMS)
Continuous Shaft
Output Power
AR-01xx 1A 3A 100W, 0.13 hp*
AR-02xx 1.75A 5.25A 200W, 0.27 hp*
AR-04xx 3A 9A 400W, 0.53 hp*
AR-08xx 4.50A 13.5A 750W, 1.0 hp*
AR-13xx 6.3A 14.07A 1300W, 1.75 hp*
AR-20xE 10A 30A 2000W, 2.7 hp**
AR-30xE 16A 48A 3000W, 4.04 hp**
* Maximum rating at 240 VAC, single-phase
** Maximum rating at 240 VAC, three-phase
Table 1 Output Power Level
Options
For the latest additions, see our website at www.parkermotion.com
Compatible Parker Products
Servo Controller
(±10V torque or velocity mode)............... ACR series or other Parker
controller
Stepper Controller (S&D mode).............. ACR series or other Parker
controller
Software ..................................................Aries Support Tool
For information about cables, motors, etc., see “Chapter 2 Mechanical
Installation”.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com