Chapter 1 Introduction - 5 -
Illustrations in this Installation Guide
Typically, the illustrations in this guide show the Aries AR-01xx and the
AR-30xE. These two models represent other models with similar features.
AR-01xx represents models AR-01xx through AR13xE. Model AR-30xE
represents the similar features of AR-20xE, as well.
If there is a need to illustrate differences between drives, relevant drawings
are shown for each drive.
Assumptions of Technical Experience
The Aries Drive is designed for industrial applications. To effectively install
and troubleshoot the Aries Drive, you must have a fundamental
understanding of the following:
• Motion control applications
• Electromechanical actuators
• Electrical concepts such as voltage, current, switches, etc.
• Serial Communication (RS-232 or RS-485) depending on which
communications protocol you are using.
Technical Support
For solutions to your questions about implementing the Aries Drive, first refer
to this manual. If you cannot find the answer in this documentation, contact
your local Automation Technology Center (ATC) or distributor for assistance.
If you need to talk to our in-house Application Engineers, please contact us
at the telephone numbers listed on page ii.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...