Parker ETH Series - 2. Commissioning; 2.1 Mounting

Commissioning
ETH Mounting Instructions
24 192-550002N10 ETH March 2019
2.3.1. Motor / gear assembly with inline motor configuration
ETH032 ... ETH080
Figure 14: Motor / gear assembly ETH032 ... ETH080 inline
ETH100&125
Dismantle motor / gearbox
 Remove motor connector.
 If you use a gearbox, we recommend to dismantle the motor from the gearbox
first for reasons of weight.
 Loosen screws (please refer to Figure 14).
 Remove motor / gearbox including mounted coupling half with caution.
6
7
3
2
E2
1
2
4
E2
2