Parker EY Series - Product Code

12 – Pvd3675_Gb_Ey_Septembre_2017
2.5. Product Code
The EY servomotors are defined by its electrical and mechanical characteristics, by its
accompanying accessories and by any customer specificity. This information is coded
and entered in the “Type” column on the manufacturer’s plate for the basic codification;
the specificities are entered in a separate column.
Code
E
Y
3
1
0
E
A
K
B
7
1
1
0
Product Series
Motor size
3, 4, 6 or 8 in relation with the motor
diameter
Motor length
up to 60 depending on size
Motor version
E: ATEX/IECEx motor
Feedback Sensor
A: Resolver 2 poles, transformation ratio = 0.5
K: without sensor
Y: Sensorless series with Parker AC servodrive
Torque / Speed Characteristics
See motor datasheet
Painting
B: Black RAL9005
Electric connection
7: Connector
Brake and thermal probe option
Thermal probe on power connector
(for AC890, AC30)
1: PTC sensor
4: with brake and PTC sensor
6: KTY84-130 sensor
7: with brake and KTY84-130 sensor
Thermal probe on signal connector
(for Compax3, SLVD, PSD)
A: PTC sensor
C: KTY sensor
D: with brake and PTC sensor
F: with brake and KTY sensor
Mechanical Interface
10: IP65 with plain shaft
11: IP65 with key on shaft
Other: custom code