60 – Pvd3675_Gb_Ey_Septembre_2017
Warning : a misalignment of the coupling device makes stress and
load on the motor shaft depending the rigidity of the installation.
The variations of the temperature makes stress and load due to the
dilatation. These loads (axials and radiale) do not exceed the load
Warning :
The misalignment of the coupling device makes vibration
who can realize a destruction of the motor shaft.
We cannot be held responsible for wear on the drive shaft resulting
from excessive strain.
4.3. Electrical connections
Danger: Check that the power to the electrical cabinet is off prior to
making any connections.
Caution:
The wiring must comply with the drive commissioning manual
and with recommended cables,
as well as local regulations and
standards.
Caution: The motor has to be connected to both groun
available (one is linked to an internal part of motor
connector, the other one to the external housing by dedicated lug).
Caution: After 15 days, check all tightening torques on cable
connection Incorrect connections may cause overheating or fire.
To Next Page
Loading...
