Parker EY Series - Introduction and Safety; Purpose and Intended Audience

5 – Pvd3675_Gb_Ey_Septembre_2017
1. INTRODUCTION
1.1. Purpose and intended audience
This manual contains information that must be observed to select, install, operate and
maintain PARKER EY servomotors.
Installation, operation and maintenance of the equipment should be carried out by
qualified personnel. A qualified person is someone who is technically competent and
familiar with all safety information and established safety practices; with the installation
process, operation and maintenance of this equipment; and with all the hazards
involved.
Reading and understanding the information described in this document is mandatory
before carrying out any operation on the motors. If any malfunction or technical problem
occurs, that has not been dealt with in this manual, please contact PARKER for technical
assistance. In case of missing information or doubts regarding the installation
procedures, safety instructions or any other issue tackled in this manual, please contact
PARKER as well.
PARKER’s responsibility is limited to its servomotors and does not encompass the
whole user’s system. Data provided in this manual are for product description only and
may not be guaranteed, unless expressly mentioned in a contract.
DANGER:
PARKER declines responsibility for any accident or material
damage that may arise, if the procedures and safety instructions
described in this manual are not scrupulously followed.
Motors for ATEX zones : Servomotors type EY manufactured for the
European market are designed to operate in ATEX classified zones.