Parker EY Series - Cables; Resolver Signal Cable

54 – Pvd3675_Gb_Ey_Septembre_2017
3.10. Cables
You can connect EY motors to PARKER servo drives : AC30, AC890, COMPAX3, PSD
or SLVD.
You can use complete cables with part numbers given as follows.
The "xxx" in the part number must be replaced by the length in meter.
Ex : for 20m cable, "xxx" = 020.
Special requirements for ATEX servomotors
For the ATEX installations, you have to use special cables C2 type
auto-extinguish regarding the standard EN 50265-2-1.
Caution : For an ambient temperature of 40°C, the standard cables
withstand a maximum surface temperature of 80°C. For an ambient
temperature of 60°C, cables able to withtand a greater maximum
surface temperature have to be provided. Please consult us.
3.10.1. Resolver signal cable
Cable reference
for PSD
with resolver
Cable reference
for COMPAX3
Cable reference
for SLVD
CP1UA1F1R0xxx CC3UA1F1R0xxx CS5UA1F1R0xxx
Cable reference
for AC890
Cable reference
for AC30
with resolver
CS4UA1F1R0xxx CS7UA1F1R0xxx
For other drive, you can assembly cable and plug by soldering with part number on
the tab below:
Cable reference
Plug reference
6537P0047 220065R4621