Parker EY Series - Servo Drive Selection

15 – Pvd3675_Gb_Ey_Septembre_2017
Furthermore, each Mi and speed associated Ωi of the duty cycle has to be located in the
operational area of the torque vs speed curve.
Torque
M
k
M
rms.
M
n
M
i
Ωi Ωk Ω
rms
Ωn Speed
3.1.5. Servo drive selection :
Selection of drive depends on its rated power, rated current and its mode selection which
leads to the maximal current duration.
Please refer to the drive technical documentation
for any further
information in order to select the best motor and drive association.