2 – Pvd3675_Gb_Ey_Septembre_2017
EU DECLARATION OF CONFORMITY
We ,
Parker Hannifin Manufacturing France SAS
Electromechanical & Drives Division Europe
Etablissement de Longvic
4 Boulevard Eiffel - CS40090
21604 LONGVIC Cedex - France
manufacturer, with brand name Parker, declare under our sole responsibility that the products,
SERVOMOTORS TYPE EY3 - EY4 - EY6 - EY8 with the following marking :
II 3 GD Ex nA IIC T3 Gc IP65 / Ex tc IIIC T200°C Dc IP65
satisfy the arrangements of the directives :
Directive 2014/35/EU : “Low Voltage Directive”, LVD
Directive 2011/65/EU : “Restriction of Hazardous Substances”, RoHS
Directive 2014/34/EU : “Equipment and protective systems intended for use in potentially explosive
atmospheres”
and meet standards or normative document according to :
EN 60034-1:2010/AC:2010 : Rotating electrical machines - Part 1 : Rating and performance.
EN 60034-5:2001/A1:2007 : Rotating electrical machines - Part 5 : Degrees of protection provided by the
integral design of rotating electrical machines (IP code) - Classification.
EN 60079-0:2012/A11:2013 : Explosive atmospheres - Part 0 : Equipment - General requirements.
EN 60079-15:2010 : Explosive atmospheres - Part 15 : Equipment protection by type of protection “n”.
EN 60079-31:2014 : Explosive atmospheres - Part 31 : Equipment dust ignition protection by enclosure “t”.
The undersigned certify that the above mentioned model is procured in accordance with the above
directives and standards.
Further information :
For an ambient temperature of -20°C to +40°C the servomotors shall be mounted on a mechanical support
providing good
heat conduction and not exceeding 40° C in the vicinity of the motor flange.
For an ambient temperature of -20°C to +60°C the servomotors shall be mounted on a mechanical support
providing good heat conduction and not exceeding 60° C in the vicinity of the motor flange.
The product must be installed in accordance with the instructions and recommendations contained in the operating
instructions PVD3675 supplied with the product.
1
st
Motor CE marking :
EY3 CE Marking : March 31
st
2016 EY6 CE Marking : March 31
st
2016
EY4 CE Marking : March 31
st
2016 EY8 CE Marking : March 31
st
2016
Longvic, November 21
st
2016
In the name of Parker
A. ANDRIOT
Quality Manager
Ref : DCE-EY-001rev1
To Next Page
Loading...
