64 – Pvd3675_Gb_Ey_Septembre_2017
6] Previous operations 2, 3, 4, 5 are to be carried out with the power connector ; then unscrew slightly the 4
grub-screws freeing the basis in rotation.
7] Rotate the power connector basis until reaching the needed orientation
8] Screw the power plug on its connector and immobilize the basis screwing the 4 grub-screws again
9] Screw the 3 screws again to fix the protector on the power connector basis
10] Final checking
To Next Page
Loading...
