PPaarrkkeerr HHaannnniiffiinn CCoorrppoorraattiioonn
Cylinder Division
Des Plaines, Illinois
120
wwwwww..ppaarrkkeerr..ccoomm/
cylinder
TThhee MMoonniittoorr LLiisstt
The Monitor List displays all the drive
parameters that you are monitoring and
continuously gets updated values from the
drive.
You can easily remove a parameter from the
Monitor List by a right click and selecting
"Delete".
"Set", available for this parameter, brings up
a dialog to change the value. Enable and
Disable allow this parameter to enabled or
disabled from being updated in the Monitor
List.
"Parameter" displays the configuration
name/instance/parameter name
"Value" displays the current value,
constantly updated.
Open saved Monitor List configuration from a
file. Save Monitor List configuration to a file.
Toggle the Monitor List to be on top.
Start recording to a file.
Stop recording.
Change the font of the items in the monitor list.
TTooooll BBaarr
TThhee CChhaarrtt RReeccoorrddeerr
The Chart Recorder displays the values of
the selected parameter(s) and
continuously gets updated values from the
drive.
"Settings" displays the settings for how the
chart recorder displays the information.
TTiimmee BBaassee [[ss]];; This is the time period
shown by the chart (x axis)
CChhaarrtt MMooddee:: When False the chart redraws
at the end of the time range; when True
the chart scrolls continuously
YY aaxxiiss aauuttoommaattiicc:: When False the Y axis is
set by "Y axis min" and "Y axis max"; when
True the Y axis is set automatically
YY AAxxiiss MMiinn//MMaaxx:: Sets the minimum and
maximum Y axis for the chart
BBaacckkggrroouunndd //GGrriidd CCoolloorr:: Ba
ckground and
Foreground color of the chart
Open saved oscilloscope configuration from a
file. Save captured oscilloscope data and
configuration. Print oscilloscope plot.
Toggle the Chart Recorder to be on top.
Display/Hide the property grid.
Restart data acquisition.
Pause data acquisition.
Start recording to a file.
Stop recording.
TTooooll BBaarr
To Next Page
Loading...
